亚洲精品国产一区二区三区四区在线,成人福利午夜,揉少妇的双乳从后挺进视频,国产一区二区三区精彩视频,成熟放荡的肉色丝袜老,《野外激情》韩国电影

 注塑級PTFE 美國3M PTFE 3M™ Dyneon™

PTFE Micropowder J24
 
塑料是東莞市雙幫塑膠原料有限公司常年銷售的塑料，因為塑料價格行情每天都有新變化前天的報價不等于今天的報價。本公司銷售的所有原料保證是原廠原包,隨料可以提供生產廠商提供的物性表、SGS報告，COA原料出廠報告,UL黃卡,ROSH報告,reach報告,SVHC報告,提供原料注塑加工工程中可能出現的各種異�，F象解決方法，塑料牌號太多，本網站沒有提供的本公司也有代理，詳情請咨詢本公司相關業務人員0769-87795123
 
13549213581
Technical Data
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Features and Benefits
 
•Low molecular weight
 
PTFE powder
 
• Non-friable, stable particle
 
•Relatively low specific surface
area compared to other
 
 
 
 
 
 
3M™ Dyneon™
PTFE Micropowder J24
 
Typical Properties
 
Property Test Method
Average Particle Size Laser Diffraction 20 μm
Hegman Particle Size Grind Gauge 15 μm
Minimum Bulk Density ASTM D4895 400 g/l
 
 
PTFE micropowders
 
•Little or no viscosity effect on
 
matrix material
 
•Broad chemical resistance and
 
temperature range of use
 
Used as an additive to:
 
• Reduce coefficient of friction or impart low surface energy 
 
 
Note: Data in this document are not for specification purposes.
 
 
Processing Recommendations
 
3M™ Dyneon™ PTFE Micropowders can be used as additives in many applications and at concentrations typically from 5 to 20%. Homogeneous incorporation is the single most important process and application consideration. Due to poor flow properties of the micropowder it is recommended that the micropowder and matrix material both be at a temperature below 30°C (86°F). However, in the case of thermoplastic blends, the micropowder may be incorporated into the melt. Dyneon PTFE Micropowder J24 can be dispersed
 
using a variety of mixing equipment. Depending upon the application, high speed mixers and tumble blenders have been successful for dry blends, while propeller mixers work well for wet mixtures such as solvents and oils. Glass bead mills should be used for relatively high viscosity mixtures and roll mills for very high viscosity applications, such as lubricating greases and oils.
 
 
Supply Form
 
PTFE Micropowder J24 is supplied in 200 lb. drums with a polyethylene liner.
 
Storage
 
PTFE Micropowder J24 has a 3 year shelf life. It should be kept in a clean and dry place in its original unopened container at temperatures below 30°C (86°F).
 
 
 
 
 
 
 
 
 
 
 
 
 
東莞市雙幫塑膠原料有限公司大量銷售塑料注塑級PTFE 美國3M PTFE 3M™ Dyneon™
PTFE Micropowder J24
 
 
 
 
因為塑料價格行情每天都有新的變化前天的報價不等于今天的報價。如果需要新的價格請電：13549213581，肖生。