亚洲精品国产一区二区三区四区在线,成人福利午夜,揉少妇的双乳从后挺进视频,国产一区二区三区精彩视频,成熟放荡的肉色丝袜老,《野外激情》韩国电影

 注塑級PTFE 美國3M PTFE 3M™ Dyneon™

PTFE
TF 5050Z
 
 
塑料是東莞市雙幫塑膠原料有限公司常年銷售的塑料，因為塑料價格行情每天都有新變化前天的報價不等于今天的報價。本公司銷售的所有原料保證是原廠原包,隨料可以提供生產廠商提供的物性表、SGS報告，COA原料出廠報告,UL黃卡,ROSH報告,reach報告,SVHC報告,提供原料注塑加工工程中可能出現的各種異常現象解決方法，塑料牌號太多，本網站沒有提供的本公司也有代理，詳情請咨詢本公司相關業務人員0769-87795123
 
13549213581
Technical Data
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Features and Benefits
 
• Bimodal particle size distribution 
 
• Low settling tendency 
 
• Excellent film-forming properties 
 
• Low porosity 
 
• High gloss 
 
• Greater hardness 
 
 
 
 
 
3M™ Dyneon™
PTFE
TF 5050Z
 
Typical Properties
 
Property Test Method
Solid Content DIN EN ISO 12086 58% (m/m)
Emulsifier non-ionic
Emulsifier Content (based on solid content) DIN EN ISO 12086 5% (m/m)
Average Particle Size DIN ISO 13321 205 nm
pH DIN ISO 976 >9.5
Viscosity D = 30 s-1 DIN 54 453 12 mPa
Specific Gravity DIN EN ISO 12086 1.5 g/cm3
Supply Form
Standard Packaging Approximate Weight of Dispersion (wet) Approximate
30 Liter Plastic Drum 7.9 U.S. Gallons 40 kg (88 lbs)
1000 Liter IBC Container in (US Known as Gaylord) 264 U.S. Gallons 1500 kg (3306 lbs)
 
 
 
 
 
Note: Data in this document are not for specification purposes.
 
 
 
Processing
 
Because of its special particle size distribution,
 
3M™ Dyneon™ PTFE TF 5050Z is particularly good for producing aqueous non-stick coating systems, which can be used to coat suitably prepared metal, glass and ceramic surfaces, (e.g., for frying pans, saucepans, etc).
 
The dispersion can be processed undiluted or diluted with distilled or deionized water.
 
Storage and Material Handling
 
The aqueous dispersion must be stored under frost-free conditions 5°- 30°C (41° - 86°F) to avoid the irreversible precipitation of PTFE. Although the dispersion has a low settling tendency, it should be homogenized by rolling or gentle stirring once per month and immediately before use. This procedure can also be used to redisperse formed sediment.
 
 
 
Safety/Toxicology
 
This is a PTFE material, so normal precautions observed with PTFE should be followed. Before processing these products, consult the Material Safety Data Sheet and follow all label directions and handling precautions. General handling/processing precautions include:
 
(1) Process only in well-ventilated areas; (2) Do not smoke in areas contaminated with powder/residue from these products; (3) Avoid eye contact; (4) After handling these products wash any contacted skin with soap and water; (5) Avoid contact with hot fluoropolymer. Potential hazards, including evolution of toxic vapors, can exist if processing occurs under excessively high temperature conditions. Vapor extractor units should be installed above processing equipment. When cleaning processing equipment, do not burn off any of this product with an open flame or in a furnace.
 
 
 
 
 
 
 
 
 
 
 
 
 
東莞市雙幫塑膠原料有限公司大量銷售塑料注塑級PTFE 美國3M PTFE 3M™ Dyneon™
PTFE
TF 5050Z
 
 
 
 
因為塑料價格行情每天都有新的變化前天的報價不等于今天的報價。如果需要新的價格請電：13549213581，肖生。