亚洲精品国产一区二区三区四区在线,成人福利午夜,揉少妇的双乳从后挺进视频,国产一区二区三区精彩视频,成熟放荡的肉色丝袜老,《野外激情》韩国电影

3M™ Dyneon™

Fluoroplastic

 

PVDF 6108/0001

 

塑料是東莞市雙幫塑膠原料有限公司常年銷售的塑料，因為塑料價格行情每天都有新變化前天的報價不等于今天的報價。本公司銷售的所有原料保證是原廠原包,隨料可以提供生產廠商提供的物性表、SGS報告，COA原料出廠報告,UL黃卡,ROSH報告,reach報告,SVHC報告,提供原料注塑加工工程中可能出現的各種異常現象解決方法，塑料牌號太多，本網站沒有提供的本公司也有代理，詳情請咨詢本公司相關業務人員0769-87795123

 

13549213581

Technical Data

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Features and Benefits

 

• High temperature capability 

 

• Excellent chemical resistance to a variety of aggressive fluids and solvents 

 

• Good permeation resistance 

 

• Smooth, anti-fouling surfaces 

 

• Injection molding grade 

 

• Low shrinkage rates 

 

• Excellent strength and dimensional stability 

• Good color stability 

 

Note: Data in this document are not for specification purposes.

 

 

 

 

 

 

3M™ Dyneon™

Fluoroplastic

 

PVDF 6108/0001

 

Typical Properties

 

Property Test Conditions Test Method

Density ISO 1183 1.78 g/cm3

H2O Absorption 24 Hours @ 23°C ISO 62 (Method 1) <0.04%

Melt Flow Index 230°C, 5 kg ASTM D1238 24 g/10 min

230°C, 2.16 kg ASTM D1238 8 g/10 min

Tensile Stress at Yield 23°C, 50 mm/min ASTM D638 50 MPa

7200 psi

Tensile Stress at Break 23°C, 50 mm/min ASTM D638 40 MPa

5800 psi

Elongation at Yield 23°C, 50 mm/min ASTM D638 8%

Elongation at Break 23°C, 50 mm/min ASTM D638 35%

Flexural Modulus 23°C, 2 mm/min ASTM D790 1930 MPa

280,000 psi

Melting Point (Crystallinity by DSC) ASTM D3418 169°C (336°F)

Deflection Temperature (4 mm Thick) Load 1.82 MPa, ASTM D648 112°C (234°F)

after annealing

Molding Shrinkage 2%

Limiting Oxygen Index (Sheet 3 mm Thick) ASTM D2863 44%

 

 

 

Product Description

 

Polyvinylidene Fluoride (PVDF) is ideal for multiple applications across a wide array of industries. Widely used in the chemical process industry, wire and cable industry, semiconductor industry, and oil and gas industry, PVDF is also gaining recognition in automotive, building, electronics, food processing, pharmaceutical and batteries.

 

3M™ Dyneon™ PVDF 6108/0001 is easily processed under a variety of conventional thermoplastic conversion techniques, being particularly suitable for injection molding. This grade is designed for parts that require shrinkage rates of 2-3%. PVDF 6108/0001 is inherently pure and chemically resistant against a variety of aggressive fluids and solvents. PVDF 6108/0001 exhibits excellent dimensional stability, abrasion resistance and high strength, and maintains its mechanical properties at elevated temperature.

 

 

 

Storage and Material Handling

 

PVDF 6108/0001 has an unlimited shelf life provided it is stored in a clean, dry place. PVDF 6108/0001 is

 

hydrophobic, and generally does not require drying before processing unless high humidity conditions create surface moisture absorption.

 

Safety/Toxicology

 

This is a fluoroplastic material so normal precautions observed with fluoroplastics should be followed. Before processing this product, read the product Material Safety Data Sheet and labels. Follow all directions and handling precautions. General handling/processing precautions include: (1) process only in well ventilated areas, (2) do not smoke in areas contaminated with powder/residue from these products; (3) avoid eye contact; (4) after handling these products wash any contacted skin with soap

 

and water.

 

 

3

 

 

 

 

 

 

東莞市雙幫塑膠原料有限公司大量銷售塑料注塑級PVDF 美國3M PVDF 

3M™ Dyneon™

Fluoroplastic

 

PVDF 6108/0001

 

 

 

 

因為塑料價格行情每天都有新的變化前天的報價不等于今天的報價。如果需要新的價格請電：13549213581，肖生。