亚洲精品国产一区二区三区四区在线,成人福利午夜,揉少妇的双乳从后挺进视频,国产一区二区三区精彩视频,成熟放荡的肉色丝袜老,《野外激情》韩国电影

 FEP 美國3M 3M™ Dyneon™

Fluoroplastic Granules
FEP 6322Z
 
塑料是東莞市雙幫塑膠原料有限公司常年銷售的塑料，因為塑料價格行情每天都有新變化前天的報價不等于今天的報價。本公司銷售的所有原料保證是原廠原包,隨料可以提供生產廠商提供的物性表、SGS報告，COA原料出廠報告,UL黃卡,ROSH報告,reach報告,SVHC報告,提供原料注塑加工工程中可能出現的各種異�，F象解決方法，塑料牌號太多，本網站沒有提供的本公司也有代理，詳情請咨詢本公司相關業務人員0769-87795123
 
13549213581
Technical Data
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Features and Benefits
 
• High extrusion speed 
 
• High thermal stability 
 
• Wide processing window 
 
• Excellent electrical properties 
 
• Excellent low smoke and low flame properties 
 
 
 
 
 
3M™ Dyneon™
Fluoroplastic Granules
FEP 6322Z
 
Typical Properties
 
Property Test Method
Melt Flow Index (372°C/5 kg) ASTM D1238 22 g/10 min
Specific Gravity ASTM D792 2.15 g/cm3
Melting Point ASTM D4591 255°C (490°F)
Tensile Strength at Break (23°C) ASTM D638 20 MPA (2,900 psi)
Elongation at Break (23°C) ASTM D638 300%
Flexural Modulus ASTM D790 580 MPA (84,000 psi)
Dielectric Strength (5 mil film) ASTM D149 2.4 kV/mil
Dielectric Constant ASTM D150 2.15 @ 1kHz (2.15 @ 1MHz)
Dissipation Factor ASTM D150 <0.0003 kHz (-.0009 MHz)
Vertical Burn (UL94) UL Bulletin 94 V-0
Limiting Oxygen Index ASTM D2863 >95%
 
 
 
 
 
 
 
 
 
Note: Data in this document are not for specification purposes.
 
 
Product Description
 
3M™ Dyneon™ Fluoroplastic Granules FEP 6322Z is designed primarily for high-speed extrusion.
 
Product Form and Packaging
 
FEP 6322Z is supplied in pellet form. It is packaged in either 25 kg PE bags or 250 kg HDPE drums with a moisture and dust-proof PE liner.
 
Storage and Material Handling
 
FEP 6322Z has a 3 year shelf life provided it is stored in a clean, dry place. FEP 6322Z is hydrophobic, and generally does not require drying before processing unless high humidity conditions create surface moisture adsorption.
 
 
Safety and Toxicology
 
This is a fluoroplastic materials, so normal precautions observed with fluoroplastics should be followed. Before processing this product, be sure to read and follow all precautions and directions for use contained in the product label and the Material Safety Data Sheet. General handling/processing precautions include: (1) Process only in well ventilated areas; (2) Do not smoke in areas contaminated with powder/residue from this product:
 
(3) Avoid eye contact; (4) After handling this product wash any contacted skin with soap and water. Potential hazards, including evolution of toxic vapors, can exist if processing occurs under excessively high temperature conditions. Appropriate local exhaust ventilation such as vapor extractor units should be installed above processing equipment. When cleaning processing equipment, do not burn off any of this product with an open flame or in a furnace.
 
 
 
 
 
 
 
 
 
 
3
 
 
 
 
 
東莞市雙幫塑膠原料有限公司大量銷售塑料美國3M FEP 3M™ Dyneon™
Fluoroplastic Granules
FEP 6322Z
 
因為塑料價格行情每天都有新的變化前天的報價不等于今天的報價。如果需要新的價格請電：13549213581，肖生。