亚洲精品国产一区二区三区四区在线,成人福利午夜,揉少妇的双乳从后挺进视频,国产一区二区三区精彩视频,成熟放荡的肉色丝袜老,《野外激情》韩国电影

Fluoroplastic AgglomerateET 6210AZ塑料是東莞市雙幫塑膠原料有限公司常年銷售的塑料，因為塑料價格行情每天都有新變化前天的報價不等于今天的報價。本公司銷售的所有原料保證是原廠原包,隨料可以提供生產廠商提供的物性表、SGS報告，COA原料出廠報告,UL黃卡,ROSH報告,reach報告,SVHC報告,提供原料注塑加工工程中可能出現的各種異常現象解決方法，塑料牌號太多，本網站沒有提供的本公司也有代理，詳情請咨詢本公司相關業務人員0769-87795123

 

13549213581

Technical Data

 

Features and Benefits

 

•Wide service temperature range

 

–200° to +150°C

 

•Low flammability

 

•Excellent electrical and

 

mechanical properties

 

•Very good resistance to solvents

 

and chemicals

 

•High resistance to outdoor

 

 

 

 

 

3M™ Dyneon™

Fluoroplastic Agglomerate

ET 6210AZ

 

Typical Properties

 

Property Test Method

Melt Flow Index (297°C/5 kg) ASTM D1238 9 g/10 min

Specific Gravity ASTM D792 1.73 g/cm3

Dielectric Constant ASTM D150 2.58 @ 1 MHz

Dielectric Strength, 0.1 mm ASTM D149 140 kV/mm

Melting Point ASTM D4591 267°C (513°F)

Maximum Service Temperature DIN 57207 part 6 150°C (302°F)

Limiting Oxygen Index (LOI) ASTM D2863 >30

 

 

weathering

 

•High light transmission in the

 

visible and UV ranges

 

•Non-stick characteristics

 

•Excellent tear resistance

 

•Low permeability

 

•Good resistance to radiation

 

 

Note: Data in this document are not for specification purposes.

 

 

Product Description

 

3M™ Dyneon™ Fluoroplastic Agglomerate ET 6210AZ is a melt processable fluoroplastic consisting mainly of alternating tetrafluoroethylene and ethylene monomer

 

units (ETFE). This partially crystalline fluorothermoplastic offers a valuable combination of properties. This agglomerate form can also be used for compounding.

 

Storage and Material Handling

 

ET 6210AZ has a shelf life of three years from date of manufacture provided it is stored in a clean, dry place in the original unopened container received from 3M.

 

ET 6210AZ is hydrophobic, and generally does not require drying before processing unless high humidity conditions create surface moisture adsorption.

 

 

Safety/Toxicology

 

This is a fluoroplastic material, so normal precautions observed with fluoroplastics should be followed. Before processing this product, be sure to read and follow all precautions and directions for use contained in the product label and the Material Safety Data Sheet. General handling/processing precautions include: (1) Process only in well-ventilated areas; (2) Do not smoke in areas contaminated with powder/residue from this product;

 

(3) Avoid eye contact; (4) After handling this product, wash any contacted skin with soap and water. Potential hazards, including evolution of vapors, can exist if processing occurs under excessively high temperature conditions. Vapor extractor units should be installed above processing equipment. When cleaning processing equipment, do not burn off any of this product with an open flame or in a furnace.

 

 

 

 

東莞市雙幫塑膠原料有限公司大量銷售塑料美國3M  ETFE 3M™ Dyneon™Fluoroplastic AgglomerateET 6210AZ因為塑料價格行情每天都有新的變化前天的報價不等于今天的報價。如果需要新的價格請電：13549213581，肖生。